Router-to-router radio backhaul over an open 802.11s mesh interface,
with FIPS providing all encryption (Noise IK), authentication, and
routing on top of bare L2 neighbor links. The mesh runs OPEN with
mesh_fwding 0 — SAE would duplicate the Noise layer and force ath10k
raw mode, and FIPS is the routing layer — so the Noise handshake is the
real auth/encryption boundary and FIPS's spanning tree does the routing.
fips-mesh-setup: an opt-in UCI helper that creates a per-radio
mesh-point interface (radio0 -> fips-mesh0, radio1 -> fips-mesh1;
trailing-digit derivation with a free-index fallback and a collision
guard). Radio setup stays opt-in — a package must not commandeer radios
on install. 'remove' takes an optional radio and otherwise removes all
instances. Dual-band routers get one instance per radio; FIPS treats the
two backhaul paths as failover, not multipath: it keeps one active link
per peer (cross-connection resolution picks a single winner), and the
second band stands by, re-establishing the peer after keepalive timeout —
traffic never uses both bands at once.
fips.yaml ships the mesh0/mesh1 Ethernet-transport entries commented
out, so a stock install that never creates fips-mesh* logs no per-boot
"interface missing" bind warning. fips-mesh-setup uncomments the matching
meshN block when it creates the interface and re-comments it on remove,
so the flash-and-drop-in flow needs no manual config edit. The file is
rewritten 0600-first (it may hold an inline nsec) via an atomic replace.
Two field-found silent non-peering causes are surfaced by the helper and
the guide:
- Same channel: mesh points only peer on a shared channel, and 'auto'
lets each radio pick its own. The helper prints the radio's
band/channel and warns loudly on 'auto' with the exact uci command to
pin one; the how-to gains an ordered no-peers triage (channel mismatch,
on-air scan check, DFS CAC wait, regdomain).
- STA channel capture: a client (sta) interface drags the whole radio to
its upstream AP's channel, so a mesh pinned elsewhere never joins and
does not recover until the STA disconnects. The helper warns when the
target radio carries a STA; the guide documents the incompatibility of a
roaming uplink with a fixed-channel mesh on the same radio.
Both the create and remove paths run 'wifi reload', which briefly drops
every client AP on all radios; the how-to sets that expectation.
Regression test: the shipped OpenWrt fips.yaml must parse via the real
Config deserializer in both states — as shipped (mesh inactive) and after
the uncomment the helper performs.
Packaging: the helper is installed across the ipk/apk/buildroot paths
(three synced copies), with the CI structural checks and shellcheck
targets extended to cover it. Full guide in
docs/how-to/set-up-80211s-mesh-backhaul.md.
The shared fips.yaml ships ethernet.wan.interface: "eth0", the default
WAN port on OpenWrt 24 and earlier. OpenWrt 25 (DSA) boards, which the
.apk package targets, name the WAN port "wan" instead. Rewrite the
staged copy at build time so the as-installed config binds the Ethernet
transport to the right port out of the box, without maintaining a second
copy of the config file. The .ipk package keeps "eth0".
Update the openwrt README to document eth0 (24) vs wan (25/DSA) and add
a CHANGELOG entry.
Add OpenWrt .apk packaging for OpenWrt 25+, where apk-tools is the
mandatory package manager. The existing .ipk continues to cover OpenWrt
24.x and earlier. Built SDK-free like the .ipk: it reuses the
cargo-zigbuild cross-compile and the shared installed-filesystem payload
under openwrt-ipk/files, and assembles the ADB container with the
official `apk mkpkg` applet from apk-tools 3.0.5 built from source, so no
OpenWrt SDK image is needed.
The package-openwrt workflow is refactored so a single compile-binaries
job cross-compiles and strips each arch once; both the .ipk and .apk
packagers consume the binaries via a new --bin-dir flag instead of each
recompiling. A build-apk job (aarch64, x86_64) builds apk-tools,
packages, and structurally verifies the .apk with `apk adbdump`. Releases
now publish .apk artifacts and checksums alongside .ipk; the release
download is scoped to fips_* so the shared raw-binary artifacts are not
swept into the published release. apk-version.sh maps a release tag or
commit height to an apk-tools-valid version, covered by a case-table test.
Packages are unsigned, installed with `apk add --allow-untrusted`,
matching the .ipk posture.
Also fix the OpenWrt control socket: the init script now pre-creates
/run/fips before starting the daemon, the procd equivalent of the systemd
unit's RuntimeDirectory=fips. Without it, on a fresh boot the daemon
resolves its control socket to /tmp (since /run/fips does not yet exist),
while fips-gateway later creates /run/fips for its own gateway.sock,
leaving fipsctl/fipstop resolving a /run/fips/control.sock the daemon
never bound.
