mirror of
https://github.com/jmcorgan/fips.git
synced 2026-07-22 07:48:26 +00:00
054d17aac5
Router-to-router radio backhaul over an open 802.11s mesh interface, with FIPS providing all encryption (Noise IK), authentication, and routing on top of bare L2 neighbor links. The mesh runs OPEN with mesh_fwding 0 — SAE would duplicate the Noise layer and force ath10k raw mode, and FIPS is the routing layer — so the Noise handshake is the real auth/encryption boundary and FIPS's spanning tree does the routing. fips-mesh-setup: an opt-in UCI helper that creates a per-radio mesh-point interface (radio0 -> fips-mesh0, radio1 -> fips-mesh1; trailing-digit derivation with a free-index fallback and a collision guard). Radio setup stays opt-in — a package must not commandeer radios on install. 'remove' takes an optional radio and otherwise removes all instances. Dual-band routers get one instance per radio; FIPS treats the two backhaul paths as failover, not multipath: it keeps one active link per peer (cross-connection resolution picks a single winner), and the second band stands by, re-establishing the peer after keepalive timeout — traffic never uses both bands at once. fips.yaml ships the mesh0/mesh1 Ethernet-transport entries commented out, so a stock install that never creates fips-mesh* logs no per-boot "interface missing" bind warning. fips-mesh-setup uncomments the matching meshN block when it creates the interface and re-comments it on remove, so the flash-and-drop-in flow needs no manual config edit. The file is rewritten 0600-first (it may hold an inline nsec) via an atomic replace. Two field-found silent non-peering causes are surfaced by the helper and the guide: - Same channel: mesh points only peer on a shared channel, and 'auto' lets each radio pick its own. The helper prints the radio's band/channel and warns loudly on 'auto' with the exact uci command to pin one; the how-to gains an ordered no-peers triage (channel mismatch, on-air scan check, DFS CAC wait, regdomain). - STA channel capture: a client (sta) interface drags the whole radio to its upstream AP's channel, so a mesh pinned elsewhere never joins and does not recover until the STA disconnects. The helper warns when the target radio carries a STA; the guide documents the incompatibility of a roaming uplink with a fixed-channel mesh on the same radio. Both the create and remove paths run 'wifi reload', which briefly drops every client AP on all radios; the how-to sets that expectation. Regression test: the shipped OpenWrt fips.yaml must parse via the real Config deserializer in both states — as shipped (mesh inactive) and after the uncomment the helper performs. Packaging: the helper is installed across the ipk/apk/buildroot paths (three synced copies), with the CI structural checks and shellcheck targets extended to cover it. Full guide in docs/how-to/set-up-80211s-mesh-backhaul.md.
936 lines
34 KiB
YAML
936 lines
34 KiB
YAML
name: OpenWrt Package
|
|
on:
|
|
push:
|
|
branches:
|
|
- master
|
|
- maint
|
|
- next
|
|
tags:
|
|
- "v*"
|
|
pull_request:
|
|
workflow_dispatch:
|
|
inputs:
|
|
arch:
|
|
description: "Target architecture (leave empty to build all)"
|
|
required: false
|
|
default: ""
|
|
|
|
env:
|
|
CARGO_TERM_COLOR: always
|
|
PACKAGE_NAME: "fips"
|
|
|
|
jobs:
|
|
determine-versioning:
|
|
runs-on: ubuntu-latest
|
|
outputs:
|
|
package_version: ${{ steps.version.outputs.package_version }}
|
|
apk_version: ${{ steps.version.outputs.apk_version }}
|
|
release_channel: ${{ steps.channel.outputs.release_channel }}
|
|
steps:
|
|
- uses: actions/checkout@v6
|
|
with:
|
|
fetch-depth: 0
|
|
|
|
- name: Derive package version
|
|
id: version
|
|
shell: bash
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
# package_version is the human-readable label used in artifact
|
|
# filenames; apk_version is the apk-tools-compatible string embedded
|
|
# in the .apk metadata. apk_version is built directly from the same
|
|
# structured inputs (tag, or commit height) — no reparse of the
|
|
# flattened package_version. See packaging/openwrt-apk/apk-version.sh.
|
|
if [[ "$GITHUB_REF" == refs/tags/* ]]; then
|
|
echo "package_version=${GITHUB_REF_NAME}" >> "$GITHUB_OUTPUT"
|
|
echo "apk_version=$(sh packaging/openwrt-apk/apk-version.sh tag "${GITHUB_REF_NAME}")" >> "$GITHUB_OUTPUT"
|
|
else
|
|
BRANCH=$(echo "$GITHUB_REF_NAME" | sed 's|/|-|g')
|
|
HEIGHT=$(git rev-list --count HEAD)
|
|
HASH=$(git rev-parse --short HEAD)
|
|
echo "package_version=${BRANCH}.${HEIGHT}.${HASH}" >> "$GITHUB_OUTPUT"
|
|
echo "apk_version=$(sh packaging/openwrt-apk/apk-version.sh dev "${HEIGHT}")" >> "$GITHUB_OUTPUT"
|
|
fi
|
|
|
|
- name: Determine release channel
|
|
id: channel
|
|
shell: bash
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
if [[ "$GITHUB_REF" == refs/tags/* ]]; then
|
|
TAG_NAME=${GITHUB_REF#refs/tags/}
|
|
if [[ $TAG_NAME =~ ^v[0-9]+\.[0-9]+\.[0-9]+-alpha ]]; then
|
|
echo "release_channel=alpha" >> "$GITHUB_OUTPUT"
|
|
elif [[ $TAG_NAME =~ ^v[0-9]+\.[0-9]+\.[0-9]+-beta ]]; then
|
|
echo "release_channel=beta" >> "$GITHUB_OUTPUT"
|
|
elif [[ $TAG_NAME =~ ^v[0-9]+\.[0-9]+\.[0-9]+$ ]]; then
|
|
echo "release_channel=stable" >> "$GITHUB_OUTPUT"
|
|
else
|
|
echo "release_channel=dev" >> "$GITHUB_OUTPUT"
|
|
fi
|
|
else
|
|
echo "release_channel=dev" >> "$GITHUB_OUTPUT"
|
|
fi
|
|
|
|
compile-binaries:
|
|
name: Cross-compile (${{ matrix.openwrt_arch }})
|
|
runs-on: ubuntu-latest
|
|
needs: determine-versioning
|
|
|
|
strategy:
|
|
fail-fast: false
|
|
matrix:
|
|
include:
|
|
- build_arch: aarch64
|
|
openwrt_arch: aarch64_cortex-a53
|
|
rust_target: aarch64-unknown-linux-musl
|
|
rust_channel: stable
|
|
# MT3000, MT6000, Flint 2, RPi 3/4/5
|
|
# MIPS disabled: nostr-relay-pool 0.44 uses std::sync::atomic::AtomicU64
|
|
# directly (fips's own atomics already use portable_atomic). Re-enable
|
|
# once an upstream portable-atomic patch lands (or via [patch.crates-io]).
|
|
# - build_arch: mipsel
|
|
# openwrt_arch: mipsel_24kc
|
|
# rust_target: mipsel-unknown-linux-musl
|
|
# rust_channel: nightly
|
|
# - build_arch: mips
|
|
# openwrt_arch: mips_24kc
|
|
# rust_target: mips-unknown-linux-musl
|
|
# rust_channel: nightly
|
|
- build_arch: x86_64
|
|
openwrt_arch: x86_64
|
|
rust_target: x86_64-unknown-linux-musl
|
|
rust_channel: stable
|
|
# x86 routers / VMs
|
|
|
|
steps:
|
|
- uses: actions/checkout@v6
|
|
with:
|
|
fetch-depth: 0
|
|
|
|
- name: Install Rust toolchain (stable)
|
|
if: matrix.rust_channel == 'stable'
|
|
uses: actions-rust-lang/setup-rust-toolchain@v1
|
|
with:
|
|
target: ${{ matrix.rust_target }}
|
|
cache: false
|
|
rustflags: ''
|
|
|
|
- name: Install Rust toolchain (nightly, Tier 3)
|
|
if: matrix.rust_channel == 'nightly'
|
|
uses: dtolnay/rust-toolchain@nightly
|
|
with:
|
|
components: rust-src
|
|
|
|
- name: Cache Cargo registry + build
|
|
if: ${{ env.ACT != 'true' }}
|
|
uses: actions/cache@v5
|
|
with:
|
|
path: |
|
|
~/.cargo/registry
|
|
~/.cargo/git
|
|
target/${{ matrix.rust_target }}
|
|
key: openwrt-${{ matrix.rust_target }}-${{ hashFiles('**/Cargo.lock') }}
|
|
restore-keys: |
|
|
openwrt-${{ matrix.rust_target }}-
|
|
|
|
- name: Install cargo-zigbuild
|
|
run: cargo install cargo-zigbuild --version 0.19.8 --locked
|
|
|
|
- name: Install zig (required by cargo-zigbuild)
|
|
run: |
|
|
ZIG_VERSION="0.13.0"
|
|
ARCH=$(uname -m)
|
|
case "$ARCH" in
|
|
x86_64|amd64) ZIG_ARCH="x86_64" ;;
|
|
aarch64|arm64) ZIG_ARCH="aarch64" ;;
|
|
*) echo "Unsupported architecture: $ARCH"; exit 1 ;;
|
|
esac
|
|
curl -fsSL "https://ziglang.org/download/${ZIG_VERSION}/zig-linux-${ZIG_ARCH}-${ZIG_VERSION}.tar.xz" | sudo tar xJ -C /opt
|
|
sudo ln -sf /opt/zig-linux-${ZIG_ARCH}-${ZIG_VERSION}/zig /usr/local/bin/zig
|
|
zig version
|
|
|
|
- name: Install llvm-strip
|
|
run: sudo apt-get update && sudo apt-get install -y --no-install-recommends llvm
|
|
|
|
# Cross-compile + strip once; both the .ipk and .apk packagers consume
|
|
# these artifacts via --bin-dir, so the Rust build runs a single time
|
|
# per architecture instead of once per package format.
|
|
- name: Cross-compile and strip binaries
|
|
run: |
|
|
set -euo pipefail
|
|
cargo zigbuild --release --target ${{ matrix.rust_target }} \
|
|
--bin fips --bin fipsctl --bin fipstop --bin fips-gateway
|
|
RELEASE_DIR="target/${{ matrix.rust_target }}/release"
|
|
mkdir -p out
|
|
for b in fips fipsctl fipstop fips-gateway; do
|
|
llvm-strip "$RELEASE_DIR/$b" 2>/dev/null || true
|
|
cp "$RELEASE_DIR/$b" "out/$b"
|
|
done
|
|
ls -lh out/
|
|
|
|
- name: Upload binaries artifact
|
|
uses: actions/upload-artifact@v7
|
|
with:
|
|
name: fips-bins-${{ matrix.openwrt_arch }}
|
|
path: out/
|
|
retention-days: 1
|
|
|
|
build:
|
|
name: Build .ipk (${{ matrix.openwrt_arch }})
|
|
runs-on: ubuntu-latest
|
|
needs: [determine-versioning, compile-binaries]
|
|
|
|
strategy:
|
|
fail-fast: false
|
|
matrix:
|
|
# Must be a subset of compile-binaries' arches (this job consumes those
|
|
# binary artifacts). Currently both ship aarch64 + x86_64.
|
|
include:
|
|
- build_arch: aarch64
|
|
openwrt_arch: aarch64_cortex-a53
|
|
- build_arch: x86_64
|
|
openwrt_arch: x86_64
|
|
|
|
steps:
|
|
- uses: actions/checkout@v6
|
|
with:
|
|
fetch-depth: 0
|
|
|
|
- name: Set SOURCE_DATE_EPOCH from git
|
|
run: echo "SOURCE_DATE_EPOCH=$(git log -1 --format=%ct)" >> "$GITHUB_ENV"
|
|
|
|
- name: Initialize
|
|
run: |
|
|
PACKAGE_FILENAME=${{ env.PACKAGE_NAME }}_${{ needs.determine-versioning.outputs.package_version }}_${{ matrix.openwrt_arch }}.ipk
|
|
echo "PACKAGE_FILENAME=$PACKAGE_FILENAME" >> $GITHUB_ENV
|
|
|
|
- name: Download prebuilt binaries
|
|
uses: actions/download-artifact@v8
|
|
with:
|
|
name: fips-bins-${{ matrix.openwrt_arch }}
|
|
path: bins
|
|
|
|
- name: Install nak
|
|
shell: bash
|
|
run: |
|
|
NAK_VERSION="0.16.2"
|
|
ARCH=$(uname -m)
|
|
case "$ARCH" in
|
|
x86_64|amd64) NAK_ARCH="amd64" ;;
|
|
aarch64|arm64) NAK_ARCH="arm64" ;;
|
|
*) echo "Unsupported architecture: $ARCH"; exit 1 ;;
|
|
esac
|
|
curl -fsSL "https://github.com/fiatjaf/nak/releases/download/v${NAK_VERSION}/nak-v${NAK_VERSION}-linux-${NAK_ARCH}" \
|
|
-o /usr/local/bin/nak
|
|
chmod +x /usr/local/bin/nak
|
|
nak --version
|
|
|
|
- name: Install jq
|
|
run: |
|
|
if ! command -v jq &>/dev/null; then
|
|
sudo apt-get update && sudo apt-get install -y jq
|
|
fi
|
|
|
|
# Priority: HIVE_CI_NSEC from env (loom job) > repo secret > generate ephemeral
|
|
- name: Resolve signing key
|
|
id: keys
|
|
shell: bash
|
|
env:
|
|
SECRET_NSEC: ${{ secrets.HIVE_CI_NSEC }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
if [ -n "${HIVE_CI_NSEC:-}" ]; then
|
|
echo "Using HIVE_CI_NSEC from loom job environment"
|
|
NSEC="$HIVE_CI_NSEC"
|
|
elif [ -n "$SECRET_NSEC" ]; then
|
|
echo "Using HIVE_CI_NSEC from repository secrets"
|
|
NSEC="$SECRET_NSEC"
|
|
else
|
|
echo "No nsec provided -- generating ephemeral keypair"
|
|
NSEC=$(nak key generate)
|
|
fi
|
|
|
|
PUBKEY=$(echo "$NSEC" | nak key public)
|
|
echo "::add-mask::$NSEC"
|
|
echo "nsec=$NSEC" >> "$GITHUB_OUTPUT"
|
|
echo "pubkey=$PUBKEY" >> "$GITHUB_OUTPUT"
|
|
echo "Publisher pubkey (hex): $PUBKEY"
|
|
- name: Build .ipk
|
|
env:
|
|
PKG_VERSION: ${{ needs.determine-versioning.outputs.package_version }}
|
|
run: ./packaging/openwrt-ipk/build-ipk.sh --arch ${{ matrix.build_arch }} --bin-dir "$GITHUB_WORKSPACE/bins"
|
|
|
|
- name: Install shellcheck (if missing)
|
|
shell: bash
|
|
run: |
|
|
if ! command -v shellcheck >/dev/null 2>&1; then
|
|
sudo apt-get update && sudo apt-get install -y --no-install-recommends shellcheck
|
|
fi
|
|
shellcheck --version
|
|
|
|
- name: Lint shipped shell scripts
|
|
shell: bash
|
|
run: |
|
|
set -euo pipefail
|
|
FILES_DIR=packaging/openwrt-ipk/files
|
|
# Scripts shipped inside the .ipk. The init scripts use the OpenWrt
|
|
# `#!/bin/sh /etc/rc.common` shebang; tell shellcheck to treat them
|
|
# as POSIX sh and silence the unrecognized-shebang warning (SC1008).
|
|
# SC2317 (unreachable command) fires on rc.common's externally-invoked
|
|
# start_service/stop_service/reload_service hooks.
|
|
TARGETS=(
|
|
"$FILES_DIR/etc/init.d/fips"
|
|
"$FILES_DIR/etc/init.d/fips-gateway"
|
|
"$FILES_DIR/etc/fips/firewall.sh"
|
|
"$FILES_DIR/etc/hotplug.d/net/99-fips"
|
|
"$FILES_DIR/etc/uci-defaults/90-fips-setup"
|
|
"$FILES_DIR/usr/bin/fips-mesh-setup"
|
|
)
|
|
fail=0
|
|
for f in "${TARGETS[@]}"; do
|
|
if [ ! -f "$f" ]; then
|
|
echo "FAIL: missing $f"
|
|
fail=1
|
|
continue
|
|
fi
|
|
echo "==> shellcheck $f"
|
|
if shellcheck --shell=sh --exclude=SC1008,SC2317,SC2034,SC3043,SC2086,SC2089,SC2090 "$f"; then
|
|
echo " PASS"
|
|
else
|
|
echo " FAIL"
|
|
fail=1
|
|
fi
|
|
done
|
|
if [ "$fail" -ne 0 ]; then
|
|
echo "shellcheck FAILED"
|
|
exit 1
|
|
fi
|
|
echo "shellcheck PASS (${#TARGETS[@]} scripts)"
|
|
|
|
- name: Sysctl drop-in syntax check
|
|
shell: bash
|
|
run: |
|
|
set -euo pipefail
|
|
FILES_DIR=packaging/openwrt-ipk/files
|
|
TARGETS=(
|
|
"$FILES_DIR/etc/sysctl.d/fips-gateway.conf"
|
|
"$FILES_DIR/etc/sysctl.d/fips-bridge.conf"
|
|
)
|
|
fail=0
|
|
for conf in "${TARGETS[@]}"; do
|
|
if [ ! -f "$conf" ]; then
|
|
echo "FAIL: missing $conf"
|
|
fail=1
|
|
continue
|
|
fi
|
|
echo "==> validating $conf"
|
|
lineno=0
|
|
file_ok=1
|
|
while IFS= read -r line || [ -n "$line" ]; do
|
|
lineno=$((lineno + 1))
|
|
# Skip comments and blank lines.
|
|
case "$line" in
|
|
''|\#*) continue ;;
|
|
esac
|
|
# Match: <key> = <value> where key is dotted lower-id and value is
|
|
# an integer (sysctl drop-ins shipped here are all numeric toggles).
|
|
if ! [[ "$line" =~ ^[a-z0-9_.-]+[[:space:]]*=[[:space:]]*-?[0-9]+[[:space:]]*$ ]]; then
|
|
echo " FAIL line $lineno: $line"
|
|
file_ok=0
|
|
fi
|
|
done < "$conf"
|
|
if [ "$file_ok" -eq 1 ]; then
|
|
echo " PASS"
|
|
else
|
|
fail=1
|
|
fi
|
|
done
|
|
if [ "$fail" -ne 0 ]; then
|
|
echo "sysctl drop-in syntax check FAILED"
|
|
exit 1
|
|
fi
|
|
echo "sysctl drop-in syntax check PASS"
|
|
|
|
- name: Verify ipk structural integrity
|
|
shell: bash
|
|
run: |
|
|
set -euo pipefail
|
|
IPK="dist/${{ env.PACKAGE_FILENAME }}"
|
|
if [ ! -f "$IPK" ]; then
|
|
echo "FAIL: produced ipk not found at $IPK"
|
|
exit 1
|
|
fi
|
|
echo "==> file type:"
|
|
file "$IPK"
|
|
|
|
# OpenWrt .ipk = tar.gz containing debian-binary + control.tar.gz +
|
|
# data.tar.gz (NOT an ar archive like Debian's .deb).
|
|
WORK=$(mktemp -d)
|
|
trap 'rm -rf "$WORK"' EXIT
|
|
|
|
tar -xzf "$IPK" -C "$WORK"
|
|
echo "==> top-level entries:"
|
|
ls -la "$WORK"
|
|
|
|
# Top-level structural assertions.
|
|
fail=0
|
|
for entry in debian-binary control.tar.gz data.tar.gz; do
|
|
if [ ! -f "$WORK/$entry" ]; then
|
|
echo "FAIL: missing top-level $entry"
|
|
fail=1
|
|
else
|
|
echo " PASS top-level: $entry"
|
|
fi
|
|
done
|
|
if [ "$fail" -ne 0 ]; then exit 1; fi
|
|
|
|
# debian-binary content sanity.
|
|
dbin_content=$(cat "$WORK/debian-binary" | tr -d '[:space:]')
|
|
if [ "$dbin_content" != "2.0" ]; then
|
|
echo "FAIL: debian-binary content is '$dbin_content' (expected 2.0)"
|
|
exit 1
|
|
fi
|
|
echo " PASS debian-binary content: 2.0"
|
|
|
|
# Inspect data.tar.gz contents.
|
|
DATA_LIST="$WORK/data.list"
|
|
tar -tzf "$WORK/data.tar.gz" > "$DATA_LIST"
|
|
echo "==> data.tar.gz entry count: $(wc -l < "$DATA_LIST")"
|
|
|
|
# Required filesystem entries inside data.tar.gz. Entries are
|
|
# produced with a leading "./" by build-ipk.sh.
|
|
REQUIRED=(
|
|
./usr/bin/fips
|
|
./usr/bin/fipsctl
|
|
./usr/bin/fipstop
|
|
./usr/bin/fips-gateway
|
|
./usr/bin/fips-mesh-setup
|
|
./etc/init.d/fips
|
|
./etc/init.d/fips-gateway
|
|
./etc/fips/fips.yaml
|
|
./etc/fips/firewall.sh
|
|
./etc/dnsmasq.d/fips.conf
|
|
./etc/sysctl.d/fips-gateway.conf
|
|
./etc/sysctl.d/fips-bridge.conf
|
|
./etc/hotplug.d/net/99-fips
|
|
./etc/uci-defaults/90-fips-setup
|
|
./lib/upgrade/keep.d/fips
|
|
)
|
|
for path in "${REQUIRED[@]}"; do
|
|
if grep -Fxq "$path" "$DATA_LIST"; then
|
|
echo " PASS data: $path"
|
|
else
|
|
echo " FAIL data: missing $path"
|
|
fail=1
|
|
fi
|
|
done
|
|
|
|
# Inspect control.tar.gz: must contain control file + maintainer scripts.
|
|
CTRL_LIST="$WORK/control.list"
|
|
tar -tzf "$WORK/control.tar.gz" > "$CTRL_LIST"
|
|
echo "==> control.tar.gz entry count: $(wc -l < "$CTRL_LIST")"
|
|
for path in ./control ./conffiles ./postinst ./prerm; do
|
|
if grep -Fxq "$path" "$CTRL_LIST"; then
|
|
echo " PASS control: $path"
|
|
else
|
|
echo " FAIL control: missing $path"
|
|
fail=1
|
|
fi
|
|
done
|
|
|
|
if [ "$fail" -ne 0 ]; then
|
|
echo "ipk structural verification FAILED"
|
|
exit 1
|
|
fi
|
|
echo "ipk structural verification PASS"
|
|
|
|
- name: SHA-256 hashes
|
|
run: |
|
|
echo "==> Binaries:"
|
|
sha256sum bins/fips bins/fipsctl bins/fipstop
|
|
echo "==> Package:"
|
|
sha256sum dist/${{ env.PACKAGE_FILENAME }}
|
|
|
|
- name: Upload artifact (GitHub only)
|
|
if: ${{ env.ACT != 'true' }}
|
|
uses: actions/upload-artifact@v7
|
|
with:
|
|
name: ${{ env.PACKAGE_FILENAME }}
|
|
path: dist/${{ env.PACKAGE_FILENAME }}
|
|
retention-days: 30
|
|
|
|
- name: Upload to Blossom
|
|
id: blossom_upload
|
|
continue-on-error: true
|
|
shell: bash
|
|
env:
|
|
BLOSSOM_SERVER: "https://blossom.primal.net"
|
|
NSEC: ${{ steps.keys.outputs.nsec }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
|
|
FILE_HASH=""
|
|
for attempt in 1 2 3; do
|
|
if UPLOAD_RESPONSE=$(nak blossom upload \
|
|
--server "$BLOSSOM_SERVER" \
|
|
--sec "$NSEC" \
|
|
"dist/${{ env.PACKAGE_FILENAME }}" < /dev/null); then
|
|
echo "Upload response (attempt $attempt):"
|
|
echo "$UPLOAD_RESPONSE"
|
|
FILE_HASH=$(echo "$UPLOAD_RESPONSE" | jq -r '.sha256')
|
|
if [ -n "$FILE_HASH" ] && [ "$FILE_HASH" != "null" ]; then
|
|
break
|
|
fi
|
|
echo "Upload response had no sha256 (attempt $attempt)"
|
|
else
|
|
echo "Blossom upload timed out or failed (attempt $attempt)"
|
|
fi
|
|
FILE_HASH=""
|
|
[ "$attempt" -lt 3 ] && sleep $((attempt * 10))
|
|
done
|
|
|
|
if [ -z "$FILE_HASH" ] || [ "$FILE_HASH" = "null" ]; then
|
|
echo "Blossom upload did not succeed after 3 attempts; non-fatal."
|
|
echo "The package still ships as a GitHub release artifact; only the"
|
|
echo "supplementary Blossom/nostr distribution is skipped this run."
|
|
exit 1
|
|
fi
|
|
|
|
BLOSSOM_URL="${BLOSSOM_SERVER}/${FILE_HASH}"
|
|
echo "url=$BLOSSOM_URL" >> "$GITHUB_OUTPUT"
|
|
echo "hash=$FILE_HASH" >> "$GITHUB_OUTPUT"
|
|
echo "Uploaded to Blossom: $BLOSSOM_URL"
|
|
|
|
- name: Publish NIP-94 release event
|
|
id: publish
|
|
if: steps.blossom_upload.outcome == 'success'
|
|
shell: bash
|
|
env:
|
|
RELAYS: "wss://relay.damus.io wss://nos.lol wss://nostr.mom wss://offchain.pub"
|
|
NSEC: ${{ steps.keys.outputs.nsec }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
set -e
|
|
|
|
VERSION="${{ needs.determine-versioning.outputs.package_version }}"
|
|
CHANNEL="${{ needs.determine-versioning.outputs.release_channel }}"
|
|
|
|
nak event --sec "$NSEC" -k 1063 \
|
|
-c "FIPS Package: ${{ env.PACKAGE_NAME }} for ${{ matrix.openwrt_arch }}" \
|
|
--tag url="${{ steps.blossom_upload.outputs.url }}" \
|
|
--tag m="application/octet-stream" \
|
|
--tag x="${{ steps.blossom_upload.outputs.hash }}" \
|
|
--tag ox="${{ steps.blossom_upload.outputs.hash }}" \
|
|
--tag filename="${{ env.PACKAGE_FILENAME }}" \
|
|
--tag A="${{ matrix.openwrt_arch }}" \
|
|
--tag v="$VERSION" \
|
|
--tag n="${{ env.PACKAGE_NAME }}" \
|
|
--tag format="ipk" \
|
|
--tag compression="none" \
|
|
> event.json 2> event.err
|
|
|
|
if [ ! -s event.json ]; then
|
|
echo "Failed to create event"
|
|
cat event.err 2>/dev/null || true
|
|
exit 1
|
|
fi
|
|
|
|
echo "=== Event JSON ==="
|
|
cat event.json
|
|
echo "=================="
|
|
|
|
EVENT_ID=$(jq -r '.id' event.json)
|
|
if [ -z "$EVENT_ID" ] || [ "$EVENT_ID" = "null" ]; then
|
|
echo "Failed to extract event ID"
|
|
exit 1
|
|
fi
|
|
|
|
# Publish to relays
|
|
cat event.json | nak event $RELAYS 2>&1
|
|
|
|
echo "eventId=$EVENT_ID" >> "$GITHUB_OUTPUT"
|
|
echo "Published NIP-94 event: $EVENT_ID"
|
|
|
|
- name: Verify NIP-94 event on relays
|
|
if: ${{ steps.publish.outputs.eventId != '' }}
|
|
env:
|
|
EVENT_ID: ${{ steps.publish.outputs.eventId }}
|
|
RELAYS: "wss://relay.damus.io wss://nos.lol wss://nostr.mom wss://offchain.pub"
|
|
run: |
|
|
echo "Verifying event $EVENT_ID on relays..."
|
|
FOUND=0
|
|
for relay in $RELAYS; do
|
|
echo "Checking $relay..."
|
|
RESULT=$(nak req -i "$EVENT_ID" "$relay" 2>/dev/null || echo "")
|
|
if [ -n "$RESULT" ]; then
|
|
echo "Found on $relay"
|
|
FOUND=1
|
|
else
|
|
echo "Not found on $relay"
|
|
fi
|
|
done
|
|
|
|
if [ $FOUND -eq 0 ]; then
|
|
echo "Warning: Event not found on any relay yet (may still be propagating)"
|
|
else
|
|
echo "Event verified on at least one relay"
|
|
fi
|
|
|
|
- name: Build Summary
|
|
run: |
|
|
echo "Build Summary for ${{ matrix.openwrt_arch }}:"
|
|
echo " Package: ${{ env.PACKAGE_FILENAME }}"
|
|
echo " Release EventId: ${{ steps.publish.outputs.eventId }}"
|
|
echo " Blossom URL: ${{ steps.blossom_upload.outputs.url }}"
|
|
|
|
build-apk:
|
|
name: Build .apk (${{ matrix.openwrt_arch }})
|
|
runs-on: ubuntu-latest
|
|
needs: [determine-versioning, compile-binaries]
|
|
|
|
strategy:
|
|
fail-fast: false
|
|
matrix:
|
|
# Must be a subset of compile-binaries' arches.
|
|
include:
|
|
- build_arch: aarch64
|
|
openwrt_arch: aarch64_cortex-a53
|
|
# MT3000, MT6000, Flint 2, RPi 3/4/5 on OpenWrt 25+
|
|
- build_arch: x86_64
|
|
openwrt_arch: x86_64
|
|
# x86 routers / VMs on OpenWrt 25+
|
|
|
|
env:
|
|
# apk-tools commit OpenWrt pins for the .apk (ADB) format. Keep in sync
|
|
# with package/system/apk/Makefile in the targeted OpenWrt release so the
|
|
# packages we produce are readable by the apk on the device.
|
|
APK_TOOLS_VERSION: "3.0.5"
|
|
APK_TOOLS_COMMIT: "b5a31c0d865342ad80be10d68f1bb3d3ad9b0866"
|
|
|
|
steps:
|
|
- uses: actions/checkout@v6
|
|
with:
|
|
fetch-depth: 0
|
|
|
|
- name: Set SOURCE_DATE_EPOCH from git
|
|
run: echo "SOURCE_DATE_EPOCH=$(git log -1 --format=%ct)" >> "$GITHUB_ENV"
|
|
|
|
- name: Initialize
|
|
run: |
|
|
PACKAGE_FILENAME=${{ env.PACKAGE_NAME }}_${{ needs.determine-versioning.outputs.package_version }}_${{ matrix.openwrt_arch }}.apk
|
|
echo "PACKAGE_FILENAME=$PACKAGE_FILENAME" >> $GITHUB_ENV
|
|
|
|
- name: Download prebuilt binaries
|
|
uses: actions/download-artifact@v8
|
|
with:
|
|
name: fips-bins-${{ matrix.openwrt_arch }}
|
|
path: bins
|
|
|
|
- name: Install fakeroot
|
|
run: sudo apt-get update && sudo apt-get install -y --no-install-recommends fakeroot
|
|
|
|
# apk mkpkg lives in apk-tools v3, which is not packaged for Ubuntu, so we
|
|
# build the pinned release from source. This is the SDK-free equivalent of
|
|
# how the .ipk path uses plain tar — one small C tool, no OpenWrt SDK.
|
|
- name: Build apk-tools (${{ env.APK_TOOLS_VERSION }}) from source
|
|
run: |
|
|
set -euo pipefail
|
|
sudo apt-get install -y --no-install-recommends \
|
|
git ca-certificates build-essential meson ninja-build pkg-config \
|
|
zlib1g-dev libssl-dev libzstd-dev liblzma-dev lua5.4-dev scdoc
|
|
git clone --quiet https://gitlab.alpinelinux.org/alpine/apk-tools.git /tmp/apk-tools
|
|
cd /tmp/apk-tools
|
|
git checkout --quiet "${APK_TOOLS_COMMIT}"
|
|
meson setup build
|
|
ninja -C build src/apk
|
|
APK_BIN=/tmp/apk-tools/build/src/apk
|
|
"$APK_BIN" --version 2>/dev/null || "$APK_BIN" version 2>/dev/null || true
|
|
echo "APK_BIN=$APK_BIN" >> "$GITHUB_ENV"
|
|
|
|
- name: Build .apk
|
|
env:
|
|
PKG_VERSION: ${{ needs.determine-versioning.outputs.package_version }}
|
|
APK_VERSION: ${{ needs.determine-versioning.outputs.apk_version }}
|
|
run: ./packaging/openwrt-apk/build-apk.sh --arch ${{ matrix.build_arch }} --bin-dir "$GITHUB_WORKSPACE/bins"
|
|
|
|
- name: Verify apk structural integrity
|
|
shell: bash
|
|
run: |
|
|
set -euo pipefail
|
|
APK="dist/${{ env.PACKAGE_FILENAME }}"
|
|
if [ ! -s "$APK" ]; then
|
|
echo "FAIL: produced apk not found or empty at $APK"
|
|
exit 1
|
|
fi
|
|
echo "==> file type:"; file "$APK"
|
|
|
|
# apk v3 packages are ADB containers; dump the whole manifest with the
|
|
# apk-tools we just built. Print it in full so the exact schema is
|
|
# always visible in the log if an assertion needs adjusting.
|
|
DUMP=$(mktemp)
|
|
"$APK_BIN" adbdump "$APK" > "$DUMP" 2>/dev/null || {
|
|
echo "FAIL: 'apk adbdump' could not read $APK"; exit 1; }
|
|
echo "==> full adbdump:"; cat "$DUMP"
|
|
|
|
fail=0
|
|
# Package metadata (flat keys under info:).
|
|
for needle in "name: fips" "version: ${{ needs.determine-versioning.outputs.apk_version }}" "arch: ${{ matrix.openwrt_arch }}"; do
|
|
if grep -qF "$needle" "$DUMP"; then
|
|
echo " PASS meta: $needle"
|
|
else
|
|
echo " FAIL meta: missing '$needle'"; fail=1
|
|
fi
|
|
done
|
|
|
|
# installed-size reflects the bundled binaries (4 stripped Rust
|
|
# binaries, several MB). A payload regression that drops them shows up
|
|
# here regardless of how the path tree is formatted.
|
|
SIZE=$(awk '/^[[:space:]]*installed-size:/ {print $2; exit}' "$DUMP")
|
|
echo " installed-size: ${SIZE:-unknown}"
|
|
if [ -z "${SIZE:-}" ] || [ "$SIZE" -lt 1000000 ]; then
|
|
echo " FAIL: installed-size implausibly small (binaries missing?)"; fail=1
|
|
else
|
|
echo " PASS: installed-size >= 1MB"
|
|
fi
|
|
|
|
# The adbdump paths: block is hierarchical. Each directory is a
|
|
# top-level list item "- name: <full relative dir>"; its files are
|
|
# "- name: <basename>" nested one indent level deeper under "files:".
|
|
# (There are no "path:" keys.) Reconstruct full file paths by keying
|
|
# off the indentation of the directory-level list items.
|
|
RECON=$(awk '
|
|
/^paths:/ {p=1; diri=-1; next}
|
|
p && /^[^ #-]/ {p=0} # a new top-level key ends paths:
|
|
!p {next}
|
|
match($0, /^ *- /) {
|
|
ind=RLENGTH; rest=substr($0, RLENGTH+1)
|
|
if (diri==-1) diri=ind # first list item = directory indent
|
|
if (ind==diri) { # directory entry (or the root acl: entry)
|
|
if (rest ~ /^name: /) { dir=rest; sub(/^name: /,"",dir) } else dir=""
|
|
next
|
|
}
|
|
if (rest ~ /^name: /) { # deeper item = a file under files:
|
|
f=rest; sub(/^name: /,"",f); print (dir==""?f:dir"/"f)
|
|
}
|
|
}
|
|
' "$DUMP")
|
|
echo "==> reconstructed paths:"; printf '%s\n' "$RECON"
|
|
|
|
for path in \
|
|
usr/bin/fips usr/bin/fipsctl usr/bin/fipstop usr/bin/fips-gateway \
|
|
usr/bin/fips-mesh-setup \
|
|
etc/init.d/fips etc/init.d/fips-gateway \
|
|
etc/fips/fips.yaml etc/fips/firewall.sh etc/dnsmasq.d/fips.conf \
|
|
etc/sysctl.d/fips-gateway.conf etc/sysctl.d/fips-bridge.conf \
|
|
etc/hotplug.d/net/99-fips etc/uci-defaults/90-fips-setup \
|
|
lib/upgrade/keep.d/fips; do
|
|
if printf '%s\n' "$RECON" | grep -qxF "$path"; then
|
|
echo " PASS path: $path"
|
|
else
|
|
echo " FAIL path: missing $path"; fail=1
|
|
fi
|
|
done
|
|
|
|
if [ "$fail" -ne 0 ]; then
|
|
echo "apk structural verification FAILED"
|
|
exit 1
|
|
fi
|
|
echo "apk structural verification PASS"
|
|
|
|
- name: SHA-256 hashes
|
|
run: |
|
|
echo "==> Binaries:"
|
|
sha256sum bins/fips bins/fipsctl bins/fipstop
|
|
echo "==> Package:"
|
|
sha256sum dist/${{ env.PACKAGE_FILENAME }}
|
|
|
|
- name: Upload artifact (GitHub only)
|
|
if: ${{ env.ACT != 'true' }}
|
|
uses: actions/upload-artifact@v7
|
|
with:
|
|
name: ${{ env.PACKAGE_FILENAME }}
|
|
path: dist/${{ env.PACKAGE_FILENAME }}
|
|
retention-days: 30
|
|
|
|
- name: Install nak
|
|
shell: bash
|
|
run: |
|
|
NAK_VERSION="0.16.2"
|
|
ARCH=$(uname -m)
|
|
case "$ARCH" in
|
|
x86_64|amd64) NAK_ARCH="amd64" ;;
|
|
aarch64|arm64) NAK_ARCH="arm64" ;;
|
|
*) echo "Unsupported architecture: $ARCH"; exit 1 ;;
|
|
esac
|
|
curl -fsSL "https://github.com/fiatjaf/nak/releases/download/v${NAK_VERSION}/nak-v${NAK_VERSION}-linux-${NAK_ARCH}" \
|
|
-o /usr/local/bin/nak
|
|
chmod +x /usr/local/bin/nak
|
|
nak --version
|
|
|
|
- name: Install jq
|
|
run: |
|
|
if ! command -v jq &>/dev/null; then
|
|
sudo apt-get update && sudo apt-get install -y jq
|
|
fi
|
|
|
|
# Priority: HIVE_CI_NSEC from env (loom job) > repo secret > generate ephemeral
|
|
- name: Resolve signing key
|
|
id: keys
|
|
shell: bash
|
|
env:
|
|
SECRET_NSEC: ${{ secrets.HIVE_CI_NSEC }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
if [ -n "${HIVE_CI_NSEC:-}" ]; then
|
|
echo "Using HIVE_CI_NSEC from loom job environment"
|
|
NSEC="$HIVE_CI_NSEC"
|
|
elif [ -n "$SECRET_NSEC" ]; then
|
|
echo "Using HIVE_CI_NSEC from repository secrets"
|
|
NSEC="$SECRET_NSEC"
|
|
else
|
|
echo "No nsec provided -- generating ephemeral keypair"
|
|
NSEC=$(nak key generate)
|
|
fi
|
|
|
|
PUBKEY=$(echo "$NSEC" | nak key public)
|
|
echo "::add-mask::$NSEC"
|
|
echo "nsec=$NSEC" >> "$GITHUB_OUTPUT"
|
|
echo "pubkey=$PUBKEY" >> "$GITHUB_OUTPUT"
|
|
echo "Publisher pubkey (hex): $PUBKEY"
|
|
|
|
- name: Upload to Blossom
|
|
id: blossom_upload
|
|
continue-on-error: true
|
|
shell: bash
|
|
env:
|
|
BLOSSOM_SERVER: "https://blossom.primal.net"
|
|
NSEC: ${{ steps.keys.outputs.nsec }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
|
|
FILE_HASH=""
|
|
for attempt in 1 2 3; do
|
|
if UPLOAD_RESPONSE=$(nak blossom upload \
|
|
--server "$BLOSSOM_SERVER" \
|
|
--sec "$NSEC" \
|
|
"dist/${{ env.PACKAGE_FILENAME }}" < /dev/null); then
|
|
echo "Upload response (attempt $attempt):"
|
|
echo "$UPLOAD_RESPONSE"
|
|
FILE_HASH=$(echo "$UPLOAD_RESPONSE" | jq -r '.sha256')
|
|
if [ -n "$FILE_HASH" ] && [ "$FILE_HASH" != "null" ]; then
|
|
break
|
|
fi
|
|
echo "Upload response had no sha256 (attempt $attempt)"
|
|
else
|
|
echo "Blossom upload timed out or failed (attempt $attempt)"
|
|
fi
|
|
FILE_HASH=""
|
|
[ "$attempt" -lt 3 ] && sleep $((attempt * 10))
|
|
done
|
|
|
|
if [ -z "$FILE_HASH" ] || [ "$FILE_HASH" = "null" ]; then
|
|
echo "Blossom upload did not succeed after 3 attempts; non-fatal."
|
|
echo "The package still ships as a GitHub release artifact; only the"
|
|
echo "supplementary Blossom/nostr distribution is skipped this run."
|
|
exit 1
|
|
fi
|
|
|
|
BLOSSOM_URL="${BLOSSOM_SERVER}/${FILE_HASH}"
|
|
echo "url=$BLOSSOM_URL" >> "$GITHUB_OUTPUT"
|
|
echo "hash=$FILE_HASH" >> "$GITHUB_OUTPUT"
|
|
echo "Uploaded to Blossom: $BLOSSOM_URL"
|
|
|
|
- name: Publish NIP-94 release event
|
|
id: publish
|
|
if: steps.blossom_upload.outcome == 'success'
|
|
shell: bash
|
|
env:
|
|
RELAYS: "wss://relay.damus.io wss://nos.lol wss://nostr.mom wss://offchain.pub"
|
|
NSEC: ${{ steps.keys.outputs.nsec }}
|
|
run: |
|
|
: ${GITHUB_OUTPUT:=/tmp/github_output}
|
|
set -e
|
|
|
|
VERSION="${{ needs.determine-versioning.outputs.package_version }}"
|
|
CHANNEL="${{ needs.determine-versioning.outputs.release_channel }}"
|
|
|
|
nak event --sec "$NSEC" -k 1063 \
|
|
-c "FIPS Package: ${{ env.PACKAGE_NAME }} for ${{ matrix.openwrt_arch }} (apk)" \
|
|
--tag url="${{ steps.blossom_upload.outputs.url }}" \
|
|
--tag m="application/octet-stream" \
|
|
--tag x="${{ steps.blossom_upload.outputs.hash }}" \
|
|
--tag ox="${{ steps.blossom_upload.outputs.hash }}" \
|
|
--tag filename="${{ env.PACKAGE_FILENAME }}" \
|
|
--tag A="${{ matrix.openwrt_arch }}" \
|
|
--tag v="$VERSION" \
|
|
--tag n="${{ env.PACKAGE_NAME }}" \
|
|
--tag format="apk" \
|
|
--tag compression="none" \
|
|
> event.json 2> event.err
|
|
|
|
if [ ! -s event.json ]; then
|
|
echo "Failed to create event"
|
|
cat event.err 2>/dev/null || true
|
|
exit 1
|
|
fi
|
|
|
|
echo "=== Event JSON ==="
|
|
cat event.json
|
|
echo "=================="
|
|
|
|
EVENT_ID=$(jq -r '.id' event.json)
|
|
if [ -z "$EVENT_ID" ] || [ "$EVENT_ID" = "null" ]; then
|
|
echo "Failed to extract event ID"
|
|
exit 1
|
|
fi
|
|
|
|
# Publish to relays
|
|
cat event.json | nak event $RELAYS 2>&1
|
|
|
|
echo "eventId=$EVENT_ID" >> "$GITHUB_OUTPUT"
|
|
echo "Published NIP-94 event: $EVENT_ID"
|
|
|
|
- name: Build Summary
|
|
run: |
|
|
echo "Build Summary for ${{ matrix.openwrt_arch }} (apk):"
|
|
echo " Package: ${{ env.PACKAGE_FILENAME }}"
|
|
echo " apk version: ${{ needs.determine-versioning.outputs.apk_version }}"
|
|
echo " Release EventId: ${{ steps.publish.outputs.eventId }}"
|
|
echo " Blossom URL: ${{ steps.blossom_upload.outputs.url }}"
|
|
|
|
release:
|
|
name: Publish GitHub Release (github only)
|
|
runs-on: ubuntu-latest
|
|
needs: [build, build-apk]
|
|
if: startsWith(github.ref, 'refs/tags/')
|
|
permissions:
|
|
contents: write
|
|
|
|
steps:
|
|
- name: Download package artifacts
|
|
uses: actions/download-artifact@v8
|
|
with:
|
|
# Only the .ipk/.apk packages (named fips_<ver>_<arch>.*), not the
|
|
# fips-bins-* raw-binary artifacts shared between the build jobs.
|
|
pattern: fips_*
|
|
path: dist
|
|
merge-multiple: true
|
|
|
|
- name: Generate OpenWrt release checksums
|
|
run: |
|
|
cd dist
|
|
find . -maxdepth 1 -type f \( -name '*.ipk' -o -name '*.apk' \) -printf '%P\n' \
|
|
| LC_ALL=C sort \
|
|
| xargs sha256sum \
|
|
> checksums-openwrt.txt
|
|
|
|
- name: Create release
|
|
uses: softprops/action-gh-release@v2
|
|
with:
|
|
files: |
|
|
dist/*.ipk
|
|
dist/*.apk
|
|
dist/checksums-openwrt.txt
|
|
generate_release_notes: true
|